TKB Home - Double Switch (single charge) Z-Wave Plus White (TZ56D-ZW5)

Presentation

The TZ56D-ZW5 switch enables you to switch the connected load, either manually as a conventional switch or remotely using wireless Z-Wave+ protocol.

It can be included in a Z-Wave network and then controlled via your Z-Wave box or your remote control. The switch is equipped with an LED indicator to easily locate it in a dark room.

The TZ56D-ZW5 switch has 2 control buttons. The left one controls the connected load, and includes/excludes the Z-Wave network switch. The right-hand button enables you to control other Z-Wave devices using the association controls (Groups 2 to 4). Each group gives you the possibility of combining up to 5 other devices and control them manually via the switch.

Important: This switch requires a neutral. A pattress box with a diameter of at least 66 mm and a minimum depth of 50 mm is recommended.

Features

• Remote control for lighting
• To be installed to replace an existing switch
• Adds a control point for a device or a scene
• ON/OFF function
• Supports associated commands (Group 1 for the left button, 2 to 4 for the right-hand button)
• Local control of the load via the left-hand button
• Control over remote load(s) via right-hand button
• Status LED

Technical Specifications

• Type of module: Z-Wave+ receiver
• Colour: White
• Power supply: 230 V 50 Hz
• Wiring: 3-wire, neutral required
• Maximum power: 6A (1380W)
• Load type: Resistive
• Frequency: 868.42 MHz
• Range: up to 30m
• Dimensions: 86 x 86 x 47 mm
• Display: Blue LED