Zwave

Zwave

Showing 73-84 of 189 item(s)

FIBARO - The Button - Orange

FIBARO - The Button - Orange 2

In stock. Ordered before 5pm, delivered the next business day.

Remote

FIBARO - The Button - Orange

CHF56.00

Enables six pre-programmed actions to be activated. Different scenarios can be launched by pressing the button between 1 and 5 times or by keeping the button pressed.

MCO Home - Z-Wave+ Fan Coil Thermostat 4 pipe MHE8-FC4

MCO Home - Z-Wave+ Fan Coil Thermostat 4 pipe MHE8-FC4 2

On order

Heating

MCO Home - Z-Wave+ Fan Coil Thermostat 4 pipe MH8-FC4

CHF149.90

MCOHome Fan Coil Thermostat is a Z-Wave enabled device for indoor temperature control.

MCO Home - Z-Wave+ Fan Coil Thermostat 2 pipe MH8-FC

MCO Home - Z-Wave+ Fan Coil Thermostat 2 pipe MH8-FC 2

On order

Heating

MCO Home - Z-Wave+ Fan Coil Thermostat 2 pipe MH8-FC

CHF149.90

MCOHome Fan Coil Thermostat is a Z-Wave enabled device for indoor temperature control.

MCOHome - Z-Wave+ CO2 Sensor with temperature and humidity

In stock. Ordered before 5pm, delivered the next business day.

Probes, sensors, and detectors

MCOHome - Z-Wave+ CO2 Sensor with temperature and humidity (12VDC)

CHF159.00

With MH9-CO2 sensor by MCOHome, you can maintain good air quality in your room. 12VDC powered version.

MCOHome - Z-Wave+ PM2.5 Sensor Air Quality Monitor with temperature and humidity

In stock. Ordered before 5pm, delivered the next business day.

Probes, sensors, and detectors

MCOHome - Z-Wave+ PM2.5 Sensor Air Quality Monitor with temperature and humidity

CHF139.00

The MH10-PM air quality monitor from MCOHome will help you maintain good air quality in your room.

Z-Wave.Me - RaZberry 2 Z-Wave+ expansion board for Raspberry Pi

Z-Wave.Me - RaZberry 2 Z-Wave+ expansion board for Raspberry Pi 2

Out-of-Stock

Gateways / Antennas

Z-Wave.Me - RaZberry 2 Z-Wave+ expansion board for Raspberry Pi

CHF59.90

The RaZberry 2 is an expansion board that connects directly to the GPIO terminal of a Raspberry Pi board and turns it into a Z-Wave controller

View

Aeon Labs - Z-Wave+ Clamp Power Meter with one clamp, 60A

Aeon Labs - Z-Wave+ Clamp Power Meter with one clamp, 60A 2

On order

Monitoring consumption

Aeotec - Z-Wave Plus Clamp Power Meter with one clamp, 60A

CHF89.00

The Aeon Labs Energy Consumption Meter for single-phase systems enables controlling the energy consumed or produced for the monitored phase. Not suitable for three-phase systems.

Aeon Labs - Z-Wave+ Clamp Power Meter with 3 phases (60A, GEN5)

In stock. Ordered before 5pm, delivered the next business day.

Monitoring consumption

Aeotec - Z-Wave Plus Clamp Power Meter with 3 phases (60A, GEN5)

CHF109.00

The Aeon Labs electricity consumption meter enables you to check the amount of electricity consumed throughout the home, even for a three-phase installation. This device runs on mains electricity.

MCO Home - Touch Panel Z-Wave 2 Buttons, Black (MH-S412B)

In stock. Ordered before 5pm, delivered the next business day.

Transmitter

MCO Home - Touch Panel Z-Wave 2 Buttons, Black (MH-S412B)

CHF97.50

This switch enables you to switch the two connected loads either manually as a conventional switch or remotely using wireless Z-Wave Protocol.

MCO Home - Z-Wave+ Fan Coil Thermostat 2 pipe MH8-FC - Black

On order

Heating

MCO Home - Z-Wave+ Fan Coil Thermostat 2 pipe MH8-FC - Black

CHF149.90

MCOHome Fan Coil Thermostat is a Z-Wave enabled device for indoor temperature control.

FIBARO - Wall plug with energy consumption monitoring, French format FIBARO Wall Plug (HOMEKIT)

FIBARO - Wall plug with energy consumption monitoring, French format FIBARO Wall Plug (HOMEKIT) 2

In stock. Ordered before 5pm, delivered the next business day.

Actuators and receptors

FIBARO - Wall plug with energy consumption monitoring, French format FIBARO Wall Plug...

CHF65.00

FIBARO Wall Plug is a HomeKit-compatible smart plug that uses a Wi-Fi® connection and wireless Bluetooth® Low Energy technology. Warning: This plug is not Swiss format.

Gioanola - Impulse cold water meter

Gioanola - Impulse cold water meter 2

In stock. Ordered before 5pm, delivered the next business day.

Accessories

Gioanola - Impulse cold water meter

CHF79.90

This unique type of jet type water meter can be used to measure the volume of cold water (30°C max). It is fitted with a reed type bulb (ILST) pulse emitter.

1
…
6
7
8
…
16

Product added to wishlist

Product added to compare.