Philio - Z-Wave Smart Switch with energy usage GEN5 (PAN11-CH)

A Swiss format Z-wave+ socket for remote control of your appliances

The PAN11-CH GEN5 by Philio is a plug-in switch that enables you to use Z-Wave commands to control lighting or any other device. It is designed to work with any type of power load, up to 2,300W maximum.

It can be controlled by a remote control, PC software or any Z-Wave controller in your network.

In addition to the switch function, this micromodule can also measure the power consumed by the connected device. Instant consumption (in W) and total electricity consumption (in kWh), voltage and amperage can all be read.

This Z-Wave module also functions as a wireless repeater with your other modules to ensure total coverage for your home. It accepts over-the-air (OTA) updates and includes an overload protection.

Features

• Remote control for lighting or other appliances
• Z-Wave socket module available in Swiss Format
• Fits directly between the electrical socket and the device to be controlled
• ON/OFF function to control lights or appliances (no dimmer)
• Measures both instantaneous and cumulative consumption
• Manual control of the device via the integrated button
• Integrated LED status button
• Overload protection
• Secure radio communication via AES-128 encryption
• Integrated 500 series Z-Wave chip
• Communication 250% faster compared to standard Z-Wave devices
• Over-the-air firmware updates (OTA)
• Z-Wave message repeater
• Easy to use and install

​Technical Specifications

• Module type: Z-Wave receiver
• Power supply: 230VAC, 50/60Hz
• J type socket (Switzerland)
• Power consumption: 1W
• Maximum load: 2,300W
• Frequency: 868.42 MHz
• Transmission range: 150m free field
• Energy Measurement:
  • Min. Reading: 0.001w
  • Resolution: 0.001w
  • Precision:
  • Precision: Linear
• Dimensions: 94.5 x 58 x 56mm (75mm with plug)
• Working temperature: 0°C to 40°C
• Certifications: FCC, UL, CE, ROHS