Refurbished - FIBARO - Z-Wave FGR-223 roller shutter module (FIBARO Roller Shutter 3)

Controlled return

Reconditioned product. Inspected, cleaned and repaired (if necessary) by a technician/engineer. Guaranteed for 2 years and supplied with all the accessories necessary for its operation. UserGuide or packaging may be missing.

The Z-Wave+ FGR-223 micromodule from Fibaro - for controlling shutters remotely

The Roller Shutter 3 is the new verse of the FIBARO blinds module based on the Z-wave+ protocol (series 500).

Equipped with the latest technology, it allows for more practical and efficient management of your blinds.

The FGR-223 is a development of the FGR-222 and provides the following improvemnets:

• Supports the Z-wave Plus protocole (S0 and S2 security) and management of SmartStart
• Manual calibration - through advanced settings, you can specify the opening and closing times if you have a 5-wire blind motor (see notice)
• LED navigation menu
• Integrated Z-wave range tester
• Protection against overload - like for the Dimmer 2
• Protection against overheating - like for the Dimmer 2
• Wireless firmware update (OTA updates)
• Reverse rotation if the motor is connected to the module in reverse

Shutters protect your privacy but they can do so much more by enabling significant energy savings to be made. They can be used in winter to keep heat in, and in summer to screen out the sun's rays and keep your home as cool as possible.

The new FGR-223 micromodule controls shutter, venetian blind and even garage door engines. Thanks to the wireless Z-Wave+ protocol, it turns a standard installation into an intelligent one.

The module is placed behind an existing switch. The motor can be controlled both locally with the switch, and remotely using a Z-Wave emitter or a domotic box.

The micromodule is also capable of transmitting the instantaneous (W) and cumulative (KWh) electrical consumption of the item that it is connected to.

It has larger terminals that can be connected to two 1.5mm² cables. Its rounded form means that it meets the safety standards of the most exacting countries.

Each Z-Wave module functions with the other modules as a wireless repeater, to provide complete coverage across your home.

Note: This module requires neutral wiring to work.

Features

• Control your roller shutters remotely
• Compatible with BSO and venitian blinds with positioning of the slats
• Installation behind an existing switch
• Up/down function and positioning
• Compatible with mechanical or electronical stop motors
• Larger terminals to make wiring easier
• Rounded shape that meets the strictest standards
• Instantaneous and cumulative energy meter
• Fibaro Home Center 2 box wireless update
• Z-Wave network coverage test function
• Small, discreet and aesthetically pleasing
• Easy to use and install

Technical characteristics

• Module type: Z-Wave+ receiver
• Supply: 110 - 240V~, 50/60Hz
• Electrical consumption: < 0,8W
• Wiring: 3 wires, neutral is required
• Maximum current:
  • 4.2A resistive currents
  • 1.7A for motors with power factor compensation (inductive currents)
• Frequency: 868.42 Mhz
• Signal strength: 1mW
• Transmission range: 50m in open space, 30m inside
• Dimensions: 20.3 x 42.5 x 38.25 mm
• Operating temperature: 0-40°C
• Maximum temperature: 105°C
• Standards:
  • RoHS 2011/65/EU
  • LVD 2006/95/EC
  • EMC 2004/108/EC
  • R&TTE 1999/5/EC