This dry contact relay is perfectly suited to opening doors, as well as to any other loads which are controllable via dry contacts.
You can integrate the front door of your house into your home automation system with the first door opening module controlled by Z-Wave.
With this little device, you can open the front door of your house from a Z-Wave remote control or from your smartphone. It can be very useful, for example, when you are out and your children come home without their keys.
The device complements the existing electric strike, communicates with the Z-Wave controller and allows the door to be opened remotely. So you can get into your home without using a key.
It can also be used in other contexts. The relay is capable of switching a maximum voltage of 24V / 2A.
The relay has an input for adding external controls (by button for example) and its relay has one connector which is normally open and one which is normally closed.
The module can be powered in several ways:
- 8 to 12 VAC AC transformer
- 8 to 24 VDC DC transformer
- 9V block battery.
This device is a secure Z-Wave+ accessory and can be used in a wireless Z-Wave network with other certified accessories. It supports secure communication if the central controller supports this function.
Functions
- Control the opening of your doors remotely
- Can be installed on an existing electric strike
- Can be powered by a transformer or a battery
- Supports secure communications
- IP20 protection (must be installed in a waterproof box for outdoor installation)
Technical Specifications
- Type of module: Z-Wave+ receiver
- Power supply:
- 8-12VAC / 8-24VDC transformer
- 9V battery
- Frequency: 868.42 MHz
- Range: up to 100 m outdoors, up to 40 m in buildings
- Protection index: IP20
- Dimensions: 56 x 25 x 14 cm
- Weight: 20g
