Trio2sys - Modular 1-channel mixed EnOcean radio receiver

EnOcean DIN-rail mixed step relay receiver

The modular 1-channel mixed remote switch receiver is used to receive radio signals from switch transmitters or sensors and to connect wired pushbuttons and, if necessary, to extend the range between the transmitters and other EnOcean receivers.

It allows the switching of resistive loads, ferromagnetic and electronic lamps, power contactors or small motors.

When used as a sensor with BMS products, an acknowledgement can be obtained at each change of status or access to advanced functions such as the radio test function.

Before use, the transmitters must be assigned to a receiver. Each sensor or transmitter can control an unlimited number of receivers.

FUNCTIONS

• 1-channel receiver module
• EnOcean technology
• Remote control of lights/appliances
• Input for connecting push buttons
• ON/OFF function
• Supports all types of loads
• Up to 32 transmitters can be assigned (switches, presence detectors, or magnetic window or door contacts)
• DIN rail mounting
• Easy to install and use

 
TECHNICAL SPECIFICATIONS

• Antenna: internal
• Power supply: 230V~ / 50 Hz
• Transmission frequency: 868.3MHz
• Output load (per relay):
• Resistive load: 2300W (2300VA if Cos?=1)
• Halogen/Incandescent: 800W
• Inductive: 300W with cosφ=0,4-0,6
• Inputs: 2 buttons LRN (receiver in learning mode) and CLR (reset to 0)
• Number of associable transmitters: Up to 32 transmitters and magnetic window contacts
• Dimensions: 17mmx90mmx57mm (1 DIN rail slot)
• Operating temperature : -10 to +45°C
• Humidity: 0% to 95% relative humidity (non-condensing)
• Range in buildings:
• Masonry: 20m, through up to 3 walls
• Reinforced concrete: 10m, through 1 wall/ceiling maximum
• Plasterboard / Wood: 30m, through up to 5 walls