Weinzierl - KNX DMX Gateway 544

The KNX DMX 544 is a compact gateway between KNX and DMX512 with up to 64 freely configurable channels. DMX is a protocol for lighting control, particularly in the field of stage technology.

In master mode, the device allows convenient control of DMX lights, for example via KNX pushbuttons. Up to 64 dimming channels or 8 RGB/RGBW channels are available. Each channel can be assigned several subsets of DMX512 addresses. Dimming channels enable /rel./abs. switching. dimming of one or more DMX devices via KNX. RGB/RGBW channels enable control of RGB/RGBW-compatible DMX devices. Each RGB color and HSV attribute can be controlled individually via KNX. Each channel can be linked to a maximum of 8 scenes. In addition, 4 sequencers are available in the gateway for more complex tasks.

In slave mode, KNX actuators can be controlled via DMX. For example, room lighting, which is part of the KNX installation, can be controlled via a DMX lighting control panel. Up to 64 DMX512 addresses can be individually evaluated and sent to KNX. Dimming value, switching with switching threshold and RGB value are available for interpretation.

In slave mode, KNX actuators can be controlled via DMX. For example, room lighting, which is part of the KNX installation, can be controlled via a DMX lighting control panel. Up to 64 DMX512 addresses can be individually evaluated and sent to KNX. Dimming value, switching with switching threshold and RGB value are available for interpretation.

Technical data

Mechanical data

• Housing: plastic
• DIN rail-mounted device, width: 1 module (18 mm)

Controls and indicators

• 2 buttons and 3 LEDs, multicolor
• KNX programming button with LED (red)

DMX

• Type: DMX512
• RS-485, 250 kBit/s
• Master or slave

Power supply

• KNX bus approx. 4 mA
• DMX-side supply voltage 12 ... 24 V⎓
• DMX side approx. 5 mA

Connectors

• Connector for KNX bus (red / black)
• Plug-in screw connector (3-pole) for DMX
• Plug-in screw connector (3-pole) for power supply