Heatit Controls - Z-Temp3 Wireless Z-Wave+ Thermostat

Heatit Z-Temp3 is a battery-powered thermostat designed to control water-based heating systems. When used in combination with the Heatit Z-Water2, you can control your heating system via the Z-Wave® network or using the buttons located on the front panel. The thermostat features a user-friendly interface.

Heatit Z-Temp3 has 3 modes: Heat, Cool, and Eco.

The thermostat fits into the frames of the System 55 and can be mounted next to other equipment such as dimmers or light switches. Heatit Z-Temp3 can also be mounted directly on the wall or placed freely, for example on a shelf.

Heatit Z-Temp3 can be set as a master thermostat. This means you can set the target temperature and mode on one device, and it will automatically send the target temperature and mode to other connected devices.

All communication between Heatit Z-Temp3 and the controlled device is 100% wireless.

Heatit Z-Temp3 operates with 2 AAA batteries, but it can also be connected to an external power source. The Heatit 230VAC transformer (45 126 48) is recommended for this purpose.

Heatit Z-Temp3 can be paired with the Heatit ZM single relay, other Z-Wave relays, the Heatit ZM thermostat, the Heatit Z-TRM6 thermostat, and other Z-Wave devices to control other types of heating solutions.

Heatit Z-Temp3 is an excellent choice for the restoration or renovation of existing buildings, as it is easy to install without wiring. We recommend using several 230VAC devices to create a mesh network.

Features of the Heatit Z-Temp3 Z-Wave Thermostat:

• Z-Wave 800 series
• Battery-powered thermostat for controlling relays and thermostats
• Internal temperature sensor
• Humidity sensor
• Master thermostat
• Hysteresis - PWM
• 3 modes: Heat - Cool - Eco
• Open window detection
• 10 associations per group
• LCD screen with backlight
• Lock mode / child lock
• Firmware update (OTA)
• SmartStart
• Support for S0, S2 Authenticated Class, S2 Unauthenticated Class encryption modes

Technical specifications of Heatit Z-Temp3:

• IOT protocol: Z-Wave - 868.4 MHz (EU)
• Voltage: 3.3 VDC
• Hysteresis: 0.3 to 3.0 (default hysteresis 0.5)
• Protection rating (IP): IP21
• Ambient humidity (RH without condensation %): 10-85
• Ambient temperature range in storage (°C): -30 to 70
• Declarations: RoHS, Reach, RED
• International standard: CE, Z-Wave Plus
• Radio frequency signal range (maximum number of meters): 40
• SDK: 7.18.3
• IOT chip type: Z-Wave 800 chip
• Push buttons: 3
• Z-Wave encryption mode: S0, S2 Authenticated Class, S2 Unauthenticated Class