OMNIO - Window contact 1-channel FK101 (silver)

Presentation

The Omnio window contact 1-channel FK101 is a battery-less and maintenance-free radio transmitter to monitor the condition of windows and doors. Typical application examples can be to turn off the heating while windows are open or to raise the blinds when sliding door opens. The window contact FK101 consists of a transmitter module driven by its own solar cell and a small counter magnet and can be fixed on window- and door frames made of wood, glass and aluminium.

Brief instruction

Set the Omnio actuator in the programming mode according to its instruction manual

Press LRN button of Omnio window contact

Note : The window contact must not be further than 5 m away from the Omnio actuator

Set the Omnio actuator back in the operating mode again

Product Description

The Omnio window contact 1-channel FK101 is a battery-less and maintenancefree radio transmitter to monitor the condition of windows and doors. Typical application examples can be to turn off the heating while windows are open or to raise the blinds when sliding door opens.

The window contact FK101 consists of a transmitter module driven by its own solar cell and a small counter magnet and can be fixed on window- and door frames made of wood, glass and aluminium. If lighting conditions on site are insufficient place the model with additional back-up battery.

Operating elements

The Omnio window contact 1-channel FK101 is equipped with a magnet reed contact. A change of the reed contact status will wake the transmitter unit to send a radio telegram immediately. To program the window contact into Omnio actuators, there’s a LRN-button which is accessible through a round hole on the backside of the housing.

technical specifications

• Power supply : solar cell
• Transmission range :  indoor max. 30 m / free field max. 100 m
• Technology : EnOcean 868.3 MHz
• Radio module : EnOcean STM3xy
• EnOcean Equipment Profile (EEP) : D5-00-01
• Environment : -25 … +60 °C 0 .. 93 % rH non condensing
• Protection class : IP40
• Housing : ABS, 110 x 19 x 15 mm Magnet: 37 x 10 x 5 mm
• weight : 21g
• EC-Directives : R&TTE 1999/5/EC Electromag. Compatibility 2004/108/EC, 2014/30/EU Low-Voltage 2006/95/EC, 2014/35/EU Restriction of Hazardous Substances 2011/65/EU
• Standards : EN60950-1:2006+A11:2009+A1:2010+A12:2011 EN 62479:2010 EN300220-1:V2.4.1, EN300220-2:V2.4.1 EN301489-1:V1.9.2, EN301489-3:V1.6.1 
•