Presentation
The Omnio actuators (receivers) are controlled by radio signals coming from the Omnio transmitters. Each transmitter is able to control an unlimited amount of actuators. The radio transmitter can be manually programmed and deprogrammed to an actuator by following a simple procedure. Via actuator each transmitter can be given a certain function and different parameters.
With ARCO technology (AWAG Remote Commissioning for Omnio), all Omnio actuators can be configured completely by radio without manual access to the device. The powerful software E-Tool constitutes the key component for convenient planning, configuring and documenting projects right at your desk.
BRIEF INSTRUCTION
- Set the Omnio actuator in the programming mode according to its instruction manual
- Press Omnio handheld transmitter twice within a second.
- Note: The transmitter must not be further than 5 m away from the Omnio receiver.
- Set the Omnio actuator in the operating mode
Technical specifications
- Power supply : Electro-dynamic power generator
- Technology : EnOcean 868.3 MHz
- Radio module : EnOcean PTM210
- EnOcean Equipment Profile (EEP) : F6-02-xx, F6-04-xx
- Transmission range : indoor max. 30 m / free field max. 100 m
- Environment : -25 … +65 °C 5 .. 90 % rH non condensing
- Housing : ABS, 82 x 49 x 20 mm
- Weight : 45 g
- EC-Directives : R&TTE 1999/5/EC Electromagnetic Compatibility 2004/108/EC Low-Voltage 2006/95/EC Restriction of Hazardous Substances 2011/65/EU
- Standards : EN60950-1:2006+A11:2009+A1:2010+A12:2011 EN61000-6-2:2005, EN61000-6-4:2007+A1:2011 EN 62479:2010 EN300220-1:V2.4.1, EN300220-2:V2.4.1 EN301489-1:V1.9.2, EN301489-3:V1.6.1
