Trio2sys - Modular 1-channel 16A EnOcean receiver

EnOcean 1-channel 16A modular receiver

The 16A 1-channel modular receiver is used to receive radio signals from EnOcean switch transmitters or sensors.

Designed for switching heavy loads, it can switch resistive loads, incandescent lamps, halogen lamps, fluorescent tubes, low-voltage halogen lamps with ferromagnetic and electronic transformers, power contactors or small motors.

The 1 channel 16A modular receiver is equipped with a repeater function and a remote commissioning function (allowing remote configuration of the receiver).

FUNCTIONS

• 1 channel 16A receiver module
• EnOcean technology
• Remote control of lights/appliances
• ON/OFF function
• Supports any type of load
• Up to 32 transmitters can be assigned (switches, presence detectors, or magnetic window or door contacts)
• Zero Crossing technology
• Repeater and status feedback functions
• Remote commissioning
• DIN rail mounting
• Easy to install and use

 
TECHNICAL SPECIFICATIONS

• Power supply : 230V~ / 50 Hz
• Power consumption : 3W
• Output load:
• Resistive load : 16A/3500VA max (Cos φ=1)
• Inductive : 800W with cosφ=0,4 to 0,6
• Halogen/incandescent: 2300W
• Fluorescent: 1000W
• EnOcean Equipment Profile: D2-01-01
• Dimensions: 17.5mm x 97.4mm x 66.4mm (1 DIN rail slot)
• Operating temperature : -10 to +45°C
• Humidity: 0% to 75% relative humidity (non-condensing)
• Transmission frequency: 868.3MHz
• Range in buildings:
• Masonry: 20m, through up to 3 walls
• Reinforced concrete: 10m, through 1 wall/ceiling maximum
• Plasterboard / Wood: 30m, through up to 5 walls