Aeotec - 3 in 1 Multisensor Z-Wave Plus (GEN5) TriSensor

The 3 basic sensors that make every home smart.

Every smart Z-Wave home depends on data for really efficient automation. TriSensor provides your home with its most essential data.

3 different sensors are assembled in the incredibly small TriSensor unit. A movement detector to monitor room occupation, a temperature sensor to manage its environment and a light-intensity sensor to operate connected lighting.

Compatible with Z-Wave remote control

Constructed using Z-Wave Plus technology, the TriSensor is not only capable of collecting data anonymously and operating individual Z-Wave peripherals but is also capable of taking part in complex controller or home automation box scenarios based on IFTTT and Artificial Intelligence.

Light up your day

When it knows that you are home and it is getting dark outside, the TriSensor can automatically switch on your lighting. The intelligent rules can be configured via a Z-Wave gateway so that the TriSensor switches on room lighting progressively, then switches it off when the rooms are no longer in use.

Light up your way.

You'll never have to fumble for a light switch in the dark again. Capable of detecting movement even when it is completely dark in a room, the TriSensor can switch on your smart lighting, including LED Bulb 6s or those connected to a Nano Dimmer.

Control your comfort

With the TriSensor, your rooms will never be too hot or too cold. Its ambient temperature sensor monitors room temperature with an accuracy of ± 2% and can automatically adjust heating systems and air-conditioning systems connected to your Z-Wave controller, including non Z-Wave platforms such as Nest.

Instantaneous notifications, wherever you are

Whether you use it as an input device for a Z-Wave security system or simply to know when your family is home, the TriSensor can be used to send immediate notifications to your Smartphone when any movement is detected and you are not home.

FUNCTIONS

• 3 in 1 detector/sensor: movement, temperature and luminosity
• Small, discreet and aesthetic
• IP20 - indoor/outdoor use
• Firmware update possible
• Compatible with S2 security framework
• Button to activate/deactivate the detector
• Low battery detection
• Easy to use and install

TECHNICAL SPECIFICATIONS:

• Module type: Z-Wave transmitter
• Power supply: 1 battery CR123A 3V 1500mAh not provided (we offer you 1 x battery CR123 worth 4.90 CHF with each ZWA005 ordered from us).
• Battery service life: 1 year
• Frequency: 868.42 MHz
• Transmission distance: 100 m outdoors
• Temperature sensor:
  • Measure range: -15°C à 50°C
  • Accuracy: ±1°C
• Light sensor:
  • Measure range: 0 – 30,000 LUX
  • Accuracy: ±30 LUX
• Movement detection sensitivity: 7m
• Dimensions: 45 x 45 x 37 mm
• IP Protection: IP20