Vision Security - Z-Wave Garage Door sensor ZG8101

PRESENTATION

This sensor informs whether a garage door is open or closed by detecting the horizontal or vertical position of the door. It needs to be fitted to the door in such a way that it can give an order on any change of position, vertically or horizontally. It can be fitted using screws or double-sided adhesive. The device is battery-powered and is consequently in sleep mode unless an action is detected.

After a programmable sleep time the device will wake up and send a status report. The batteries can be changed without unscrewing the device from the door or frame.

When the batteries need to be replaced a visual warning is displayed on the device itself and a warning is sent to the Z-Wave controller. The device sends information to a controller or any other associated Z-Wave device. Up to 5 devices can be piloted from the ZG8101. Two terminals allow the connection of an external dry contact in parallel to the position sensor. The powerful Lithium CR123 battery has a life of 3 to 5 years under normal operating conditions.

FEATURES

• Position sensor for garage door
• Button to include/exclude the sensor
• Low battery warning
• Can be linked to create a group association (5 devices maximum)
• Tamper protection
• Wired input
• Uses SDK Z-Wave 5.02
• Easy to use and install
• Fixed by screws or adhesive tape

TECHNICAL SPECIFICATIONS

• Z-Wave device type: Slave
• Power supply: 1 CR123A 3V Lithium battery
• Frequency: 868.42 MHz
• Transmission range: 30m
• Display: LED
• Operational temperature: -15°C to +60°C
• Dimensions: 75 x 42 x 26mm