Milesight IOT- Indoor LoRaWAN Gateway(with 4G)

Description

Outstanding Performance

The Milesight LoRaWAN Gateway is receiving data from 8 end-devices and simultaneously supports up to 2000 end-devices. The full capacity of the gateway will depend on how frequently end-devices are reporting uplinks and receiving downlinks. The LoRaWAN Gateway is equipped with NXP 64-bit Quad-Core Processor, 2 GB DDR4 RAM and 29 GB eMMC Flash Memory, providing the outstanding performance. Multiple connectivity capabilities allows you to stay connected via Ethernet, cellular or Wi-Fi, to deliver encrypted data around the clock.

Deep signal penetration

UG65 gateway is covering up to 12 km² (2 km radius) in city area and provides good signal penetration in places like basements, multi-floor buildings and other deep-indoor locations (spaces covered by multiple walls). The signal is extremely resistant to industrial interference in urban environments. The dustproof and basic waterproof capabilities make UG65 LoRaWAN gateway more versatile even in industrial environments

High Compatibility

With built-in network server, the UG65 also supports Semtech’s latest packet forwarder, and is compatible with multiple network server platforms like AWS, TTN, ChirpStack, and Loriot which offers a wide range of options for data processing. With Milesight IoT Cloud you can store, manage and analyze all your data with a few clicks. Android & iOS versions allow you to manage devices quickly, easily and conveniently.

Flexible installation

The gateway could be mounted in three different ways. You can place the gateway on a table, attach it to a wall, or mount it on a pole.

Specifications

Hardware System

• CPU : Quad-core 1.5 GHz, 64-bit ARM Cortex-A53
• Memory : 512 MB DDR4 RAM
• Flash : 8 GB eMMC

LoRaWAN®

• Antenna : Fully Integrated Internal Antenna (Optional: 1 × 50 Ω N-Female External Antenna Connector)
• Channel : 8
• Frequency Band : CN470/IN865/EU868/RU864/US915/AU915/KR920/AS923
• Sensitivity : -140dBm Sensitivity @292bps
• Output Power : 27dBm Max
• Protocol : V1.0 Class A/Class B/Class C and V1.0.2 Class A/Class B/Class C

Ethernet Interface

• Port : 1 × RJ45 (PoE PD support)
• Physical Layer : 10/100/1000 Base-T (IEEE 802.3)
• Data Rate : Rate 10/100/1000 Mbps (Auto-Sensing)
• Interface : Auto MDI/MDIX
• Mode : Full or Half Duplex (Auto-Sensing)

Wi-Fi

• Antenna : Fully Integrated and Internal Antenna
• Standards : IEEE 802.11 b/g/n
• Tx Power : 802.11b: 18 dBm +/-2.0 dBm (11 Mbps)
• 802.11g: 15 dBm +/-2.0 dBm (6 Mbps)
• 802.11g: 15 dBm +/-2.0 dBm (54 Mbps)
• [email protected] GHz: 14 dBm +/-2.0 dBm (MCS0_HT20)
• [email protected] GHz: 14 dBm +/-2.0 dBm (MCS7_HT20)
• [email protected] GHz: 13 dBm +/-2.0 dBm (MCS0_HT40)
• [email protected] GHz: 13 dBm +/-2.0 dBm (MCS7_HT40)

Software

• Network Protocols : PPPoE, SNMP v1/v2c/v3, TCP, UDP, DHCP, DDNS,HTTP, HTTPS, DNS, ARP, SNTP, Telnet, SSH, MQTT, etc.
• VPN Tunnel : OpenVPN/IPsec/PPTP/L2TP/GRE/DMVPN
• Access Authentication : CHAP/PAP/MS-CHAP/MS-CHAPV2
• Firewall : ACL/DMZ/Port Mapping/MAC Binding/URL Filter
• Management : Web, CLI, SMS, On-demand dial up, DeviceHub, Milesight IoT Cloud
• Reliability : WAN Failover

Power Supply and Consumption

• Power Supply : DC Jack Connector for 9-24 VDC power supply, 1 × 802.3 af PoE input
• Consumption : ≤ 4.2W

Physical Characteristics

• Ingress Protection : Protection IP65
• Dimensions : 180 x 110 x 56.5 mm
• Mounting : Desktop, Wall or Pole Mounting

Others

• Reset Button : 1 × RST
• Console Port : 1 × Type-C Port
• LED Indicators : 1 × POWER, 1 × STATUS, 1 × LoRa, 1 × Wi-Fi, 1 × LTE, 1 × ETH
• Built-in : Watchdog, RTC, Timer
• Certification : CE, FCC

Environmental

• Operating Temperature : -40°C to +70°C (-40℉ to +158℉), Reduced Cellular Performance Above 60°C
• Storage Temperature : -40°C to +85°C (-40℉ to +185℉)
• Ethernet Isolation : 1.5 kV RMS
• Relative Humidity : 0% to 95% (non-condensing) at 25°C/77℉