MDT - To fit 55mm systems/ranges, White glossy finish, with temperature sensor and 2 sensor keys

The MDT Motion Detector/Automatic Switch with light sensor captures the smallest movements with its built in pyro detectors and high resolution lens. It is possible to configure 2 separate light channels, one HVA channel and one channel for room monitoring. The brightness of the room is measured by the integrated light sensor and made available as an object.
After motion detection and below an adjusted brightness value a 1Bit („1“) telegram, 1Byte dimming value (0...100%) or a scene call („ON“) is send to the bus. The sensitivity is adjustable in 10 steps. If there is no movement a 1Bit („0“) telegram, an 1Byte dimming value (0...100%) or a scene call („OFF“) is send to the bus after an adjustable follow up time.

Features

•  Fits 55mm systems/ranges:
•  GIRA Standard 55, E2, E22, Event, Esprit
•  BERKER S1, B3, B7
•  JUNG A 500, A CREATION, AS 500, A550, A FLOW
•  MERTEN 1M, M-Smart, M-Plan, M-Pure
• Motion detector with light sensor and 2 sensors
• Two sensor keys for any function
• Temperature sensor for capturing the room temperature
• Motion detection angle H 180° / V 15°, coverage 6-10m Ø
• Suitable for pets up to 12kg
• Sensitivity separately adjustable for day/night/presence
• Detection of moving direction
• 2 light channels, 1 channel for HVAC and alarm
• Short time presence to reduce stopping time
• Master/slave function, scenes and logical functions
• Integrated white LED night light
• Day/night function, orientation light function
• Block and forced setting functions with release time
• External push button input for automatic and manual operation
• Recommended installation height: 1,05 - 1,20m

Technical Specifications

• Movement 6 - 10m
• Sensitivity adjustable in 10 steps
• Angular coverage horizontal 180°
• Angular coverage vertical 15°
• Measurement range temperature 0 to + 40°C
• Number of sensor keys 2
• Recommended installation height 1,05 - 1,20m
• Specification KNX interface TP-256
• Available application software ETS 4/5
• KNX busconnection terminal 0,8mm Ø, solid core
• Power supply KNX bus
• Power consumption KNX bus typ. <0,3W
• Operation temperature range 0 to + 45°C
• Enclosure IP 20
• Dimensions (W x H) 55mm x 55mm
• Installation depth in installaton box 12mm