GCE - NRX-800 Industrial Node-Red Controller

NRX800 - Industrial Automation Raspberry CM4

The NRX800 is an industrial automation device integrating a Raspberry Compute Module 4.

It has been specially designed to ensure unbeatable stability, even in heavily disrupted industrial environments.

Particular care has been taken with the various power supply and filtering stages, which are generously dimensioned.

The quad-core BCN2711 64-bit processor enables a wide range of applications such as video processing, AI engines, and advanced automation functions.

A 128 Gb M2 SSD allows for very fast read/write access times.

The 4 USB ports extend possibilities by adding external devices such as USB sticks, Lora, Enocean, Zigbee, Modbus, 4G modem, or additional input/output modules.

To save you time, we provide the NRX800 with Linux and Node-Red installed and ready to run. Of course, you can also install other systems, such as Home Assistant OS, just as you would on a conventional Raspberry.

Technical Specifications

• CM4 Raspberry Module with heatsink
• 4 GB of RAM
• 1 M2 NVMe SSD with 128 GB
• 1 Gigabit Ethernet port 10/100/1000 Gb with IEEE 1588 support
• 2 HDMI 4K outputs with OpenGL ES 3.x and 4Kp60 H.265 video decoding
• 4 USB 2.0 ports
• 1 USB-C port for storage access (e.g., flash or Linux image restoration)
• 1 Micro SD card slot
• 1 Real-time clock with backup in case of power failure via supercapacitor
• 8 opto-isolated 5kV inputs
• 8 10A relay outputs isolated at 5kV
• 1 User-configurable LED on the front panel
• Power supply from 12 to 24 Vdc (not included)
• IP20 protection rating
• Repairability index 8.5
• Operating temperature: -10 to +60 °C @ 50% humidity
• Dimensions: 160 x 90 x 68 mm, equivalent to 9 DIN slots
• DIN rail mounting IEC60715