Dingz - Multifunction Wifi switch «dingz Plus» with motion detector (light grey)

The Swiss multifunction switch that is going to revolutionize your residence

Dingz is a multifunction Wifi switch with a Swiss format. It can pilot as per choice:

• 4 lights or thermostats in ON/OFF
• 4 lights with dimmer  
• 2 lights and 1 blinds
• 2 blinds
• Variants of all that. 

But that’s not all. It’s also possible to configure the controls to directly pilot the connected objects, for example from Philips Hue or Sonos.

The integrated movement detectors and light sensors (only with “Dingz plus”) are very practical for setting up automatic activation of lights by movement detection, while the night light that dingz switches are fitted with will guide you safely in your home.

Dingz switches are also equipped with a temperature sensor and can therefore act as a thermostat. In addition, dingz switches can directly pilot heating valves running on 230V, which avoids the use of an additional, external thermostat. 

All these functions are standard and don’t need a home automation box or Cloud service.  

And for the more curious among you, please note that Dingz is equipped with a REST API and can therefore be very easily integrated into your existing home automation system. 

Your Smarthome, whenever you want

Home automation on the Internet is possible with dingz, but optional. You use it by connecting your dingz buttons to external services via the dingz application. They offer additional possibilities to your lights, blinds and heating controls, such as voice command with Alexa and Google, control of MyStrom, Sonos or Philips Hue equipment, presence simulation functions, and much more too. 

Simply a good switch

Dingz switches not only look good but are also pleasant to use. They are robust, of high quality and are used as traditional switches while offering a panoply of innovative functions. A short, long or double press, as well as the movement detector, allow you to trigger different functions if necessary.  

Dingz comes in two versions:

• “dingz”: version without movement detector
• “dingz plus”: version with movement detector

The buttons are interchangeable to adapt to all needs (blinds, lights buttons, top-bottom, etc.). These optional, engraved buttons can be bought separately. 

Made for Switzerland

Dingz switches are compatible with the EDIZIOdue design by Feller. That’s why they adapt perfectly to their mounting boxes and plates (necessary for installation, sold separately) and match EDIZIOdue colours: white, grey, dark grey, black and café (brown). 

Installation

Experts install dingz switches in a few minutes. The procedure is simple to learn and does not need special prior expertise. The connection is similar to a conventional push button. Dingz switches are compatible with conventional switches and actuators and adapt to the most common wiring diagrams (diagram 0, 3, 6, step by step, etc.).

iolo AG

iolo AG, the founding company of dingz, was created in 2018 by Swiss intelligent home experts. iolo develops products designed to enrich everybody's daily life. Dingz push buttons are the first products based on this philosophy. They give a life in the future aspect to traditional installations and replace complicated intelligent home installations by simply replacing switches for a fraction of the cost. iolo thinks that the future lies in open and interoperable interfaces and therefore always designs its products with future developments in mind. 

Functions

• Control of 4 lights or thermostats, or two blinds, or variants
• Management of slat orientation and the length of travel when piloting blinds
• Pilotable remotely, via Wifi
• Installed instead of an existing switch
• ON / OFF, dimmer, raise/lower function
• Replaces a thermostat by directly piloting valves running on 230V
• Management of rapid click, slow click or double click.
• Can pilot connected objects (Philipe Hue, Mystrom, Sonos, ...)
• Electricity consumption monitoring
• Temperature sensor
• Light detector
• Movement detector
• Available in different colours 
• Interchangeable, engraved buttons available as an option
• Night light function
• A dingz switch can pilot others
• Control by Alexa or Google voice commands (via Mystrom App)
• Presence simulation, timer etc. functions

Package contents

Dingz Front

• WiFi unit with 4 switches, LED, temperature sensor, PIR motion detector, brightness sensor
• Installation instructions

Dingz Base

• dingz base: 230V switch unit with 4 individually dimmable outputs
• 2x screws for installation in the mounting plate
• Installation instructions

Not included

• Feller EDIZIOdue cover frame
• Feller EDIZIOdue mounting plate

Technical details

Dingz Front

• Supply voltage 3.8V DC 0.5A
• Standby consumption 0.3 W
• WiFi 2.4GHz 802.11n
• Protection type IP20
• Protection class III
• Ambient temperature +5°C to +35°C, non-condensing
• Dimensions (W x H x D) 60 x 60 x 20 mm

Dingz Base

• Power supply: 230V~ 50Hz.
• Supply current 4A
• Output power max. 400W / max. 100W max per output, max. 230W per output (for short periods of up to 2 minutes)
• Standby consumption 0.7W
• Protection type (IEC 60529) IP20, dry installation
• Protection class II
• Ambient temperature +5°C to +35°C, non-condensing
• Operating altitude 0 to 2,000 meters above sea level
• Dimensions (W x H x D) 60 x 60 x 32 mm