• -30%
MCO Home - Touch Panel Z-Wave 1 Button, White (MH-S411)
MCO Home - Touch Panel Z-Wave 1 Button, White (MH-S411)
MCO Home - Touch Panel Z-Wave 1 Button, White (MH-S411)
MCO Home - Touch Panel Z-Wave 1 Button, White (MH-S411)
MCO Home - Touch Panel Z-Wave 1 Button, White (MH-S411)
MCO Home - Touch Panel Z-Wave 1 Button, White (MH-S411)
MCO Home - Touch Panel Z-Wave 1 Button, White (MH-S411)
MCO Home - Touch Panel Z-Wave 1 Button, White (MH-S411)
MCO Home - Touch Panel Z-Wave 1 Button, White (MH-S411)
MCO Home - Touch Panel Z-Wave 1 Button, White (MH-S411)

Refurbished - MCO Home - Touch Panel Z-Wave 1 Button, White (MH-S411)

RECO_MH-S411
In stock. Ordered before 5pm, delivered the next business day.
CHF66.43 CHF94.90 -30%
Tax included
In stock 1 Item

Controlled return

This switch enables you to switch the connected load either manually as a conventional switch or remotely using wireless Z-Wave Protocol.

 

Controlled return

Reconditioned product. Inspected, cleaned and repaired (if necessary) by a technician/engineer. Guaranteed for 2 years and supplied with all the accessories necessary for its operation. UserGuide or packaging may be missing.

 

Presentation

The MH-S411-EU switch from the manufacturer MCOHome enables you to switch the connected load either manually as a conventional switch or remotely using wireless Z-Wave Protocol. Its glass finish and elegant design will add a stylish modern touch to your home.

It can be included in a Z-Wave network and then controlled via your Z-Wave box or your remote control. The switch can control any type of load, either lighting or electrical equipment.

The MH-S411-EU switch can be used to control directly associated devices (Group 1). You can therefore combine up to 5 other devices and control them manually via the switch or your Z-Wave controller.

The switch is also fitted with a LED that indicates its switching status.

Each Z-Wave module functions as a wireless repeater with the other modules to ensure that your home is fully covered.

Note: this switch requires a neutral.

 

Features

  • Remote control for lighting or other appliances
  • To be installed to replace an existing switch
  • ON/OFF function
  • Supports association controls (Group 1 and Group 2)
  • Local load control
  • Status LED
  • Glass finish, modern design
  • Touch button

 

Technical Specifications

  • Type of module: Z-Wave receiver
  • Colour: White
  • Power supply: 230 V, 50 Hz
  • Wiring: 3-wire, neutral required
  • Maximum power: 5A (1100W)
  • Frequency: 868.42 MHz
  • Range: up to 30m
  • Dimensions: 86 x 86 x 43 mm
  • Display: Blue LED
Use
Fixture Control
Lighting Control
Switches and Remote Control
Type
Module
Switch
Function
Actuator
Gateway compatibility
Fibaro Home Center - total compatibility
Homey - total compatibility
eedomus+ - total compatibility
Protocol
Z-Wave Serie 500
1 Item
No reviews
Product added to wishlist
Product added to compare.