• -20%
Fibaro - Capteur de fumée Z-Wave FGSS-001
Fibaro - Capteur de fumée Z-Wave FGSS-001
Fibaro - Capteur de fumée Z-Wave FGSS-001
Fibaro - Capteur de fumée Z-Wave FGSS-001
Fibaro - Capteur de fumée Z-Wave FGSS-001
Fibaro - Capteur de fumée Z-Wave FGSS-001

Fibaro - Z-Wave FGSS-001 smoke sensor

RECO_FIB_FGSS-001
Out-of-Stock
CHF51.01 CHF63.76 -20%
Tax included

Ritorno controllato

Fibaro smoke sensor Z-wave with power supply connection and potential-free output terminal

Important: unlike the FGSD-002, this product is a sensor and not a detector. Therefore, it is not autonomous and must be associated with a Z-Wave controller in order to work.

 

 

Ritorno controllato

Prodotto ricondizionato. Ispezionato, pulito e riparato (se necessario) da un technico/ingegnere. Garantito per 2 anni e fornito con tutti gli accessori necessari al suo funzionamento. Potrebbe mancare il manuale di istruzioni o l'imballaggio.  

Fibaro smoke sensor - Z-wave version with power supply connection and potential-free output terminal

With soft lines, a polished surface and small size, this Fibaro Smoke Sensor is as attractive as it is practical and will warn you of any discovered threat with its multicolour RGB LED diode and built-in siren.

Certain materials can burn without producing smoke. That's why the FGSS-001 is fitted with a temperature sensor. If the amount of smoke is not sufficient to trigger the alarm, the unit will still be able to detect a threat by detecting the rapid change in temperature caused by the fire.

You can connect the sensor to a 12 or 24 VDC power supply, or leave it in battery mode and enjoy up to 3 years of uninterrupted operation.

In addition to Z-Wave, this sensor can also be connected by wire to a wired alarm system.

A 'black box' integrated into the smoke sensor records information concerning the levels of smoke and temperature. Whether the alarm is armed or not, the sensor monitors the level of smoke and periodically sends information to the primary controller. Now, you can to detect even the smallest amount of cigarette smoke.

Important: unlike the FGSD-002, this product is a sensor and not a detector. Therefore, it is not autonomous and must be associated with a Z-Wave controller in order to work.

 

Features

  • Z-Wave smoke sensor
  • Can be connected to any alarm system (potential-free output terminal)
  • Powered by battery or by a continuous external power source
  • Sensitivity adjustable sensor (3 levels)
  • Protection from tampering
  • Alarm signal by sound, LED light and Z-Wave signal
  • Fire detection by air temperature measurement
  • Automatic efficiency test, carried out every 5 seconds
  • The sensor reports and records temperature and smoke data
  • Integrated Z-Wave range tester
  • Wireless update via the Fibaro Home Center 2 hub
  • Easy installation - just install it in a place where there is a risk of fire

 

Technical Specifications

  • Type of module: Z-Wave transmitter
  • Power supply: 12 - 24 VDC
  • Battery type: CR123A
  • Battery life: 3 years
  • Power consumption using an external power supply: 0.4W
  • Maximum output terminal current (SMOKE NC, TAMP NC): 25mA
  • Maximum output terminal voltage (SMOKE NC, TAMP NC): 24V (AC or DC)
  • Frequency: 868.42 MHz
  • Transmission range: 50m free field, 30m indoor
  • Dimensions: 65 x 28 mm (diameter x height)
  • Working temperature: 0-40°C
  • Temperature measurement range: -20°C to 100°C
  • Measurement precision: 0.5°C (in a range of 0 to 40°C)
  • Standards: EMC 2004/108/EC and R&TTE 199/5/WE
Use
Fire
Temperature/Humidity/CO2 Monitoring
Type
Module
Function
Fire detection
Temperature
Gateway compatibility
Fibaro Home Center - total compatibility
Homey - total compatibility
eedomus+ - total compatibility
Protocol
Z-Wave Serie 300
Refurbished

Fibaro is a well-known player in the Z-Wave home automation field. This Polish company manufactures home automation controllers and multiple Z-Wave modules.

Fibaro is renowned for commercialising products with a particularly good design. You may well be surprised when unwrapping your Fibaro brand smoke or motion detector for the first time.

As leader of the Z-Wave home automation field since 2010, we were the first company to commercialise Fibaro brand products in Switzerland.

The Z-Wave ecosystem is very large and offers multiple possibilities.
Do not hesitate to contact us to help you make your choice.

No reviews
Product added to wishlist
Product added to compare.