FIBARO - Z-Wave Universal Binary Sensor FGBS-222 (FIBARO Smart Implant)

Improve your equipment and make it intelligent !

FIBARO Smart Implant allows you to improve your cabled sensors and other devices by adding a Z-Wave communication network.

You can connect binary sensors, analogical sensors, DS18B20 temperature sensors, or DHT22 humidity and temperature sensors, and the Smart Implant will send the measures to the Z-Wave controller.

It can also control a unit by opening/closing output contacts independently from inputs.

 

Intelligence with a great power

The Smart Implant is the intelligence of your equipment in the shape of a small cube. When it is connected to a unit, the Smart Implant extends its operation with enhanced capabilities. Nowadays the Smart Implant is the only solution on the market using the Z-Wave technology to change ordinary equipment into units compatible with the Fibaro home automation system.

 

Safe installation

The Smart Implant is powered by safety low voltage with a wide 9-30V span. It is protected against the detrimental effects of a bad connection (For example : wrong polarity).

 

Neutral for the apparatus

The use of the Smart Implant is transparent for alarm systems. It does not interfere either with the normal functioning of the apparatus.

 

Intelligent garage doors

Controlling the garage door with a remote control is currently the standard solution we use. You do not have to pay to replace your garage door by a new one or to invest in complex automation systems, as it is enough to connect the Smart Implant to the garage door controller to connect it to the FIBARO system and control it with the KeyFob.

 

An alarm system integrated in your intelligent house

Thanks to the Smart Implant, the integration of the wired alarm system in the FIBARO house automation system extends the functionalities of the movement and door/windows opening sensors, including the possibility to communicate with the intelligent house automation system. Moreover, it allows you to activate the alarm system remotely with a Smartphone. You can be sure that your property is safe and you can check wherever you are.

 

The heating system is now part of an intelligent house

The heating system is the one in the house which it is easier to automate. Install the FIBARO Smart Implant in the controller of your boiler and your floor heating to make your heating intelligent. Then, if necessary, you can modify the heating hours wherever you are with a Smartphone, a tablet or ... do nothing as FIBARO frees you from the obligation to manage the heating and knows how to take care of the comfort of each separate member of the family.

 

Sensors will make your garden intelligent

We want to have an intelligent house, why not try and have an intelligent garden too. The Smart Implant is an opportunity for the gardeners who have equipped their garden with wind, temperature and soil humidity sensors. By placing the Smart Implant in the sensor, you equip it with a connection to the FIBARO system which collects the transmitted information and can then start watering your garden or warming the swimming pool water at the right time.

 

A second life for your old equipment

We often have at home some equipment that we wish to keep for sentimental reasons or for their unique design. Thanks to the Smart Implant, this equipment which has proved reliable over the years, such as AV receivers, radios, amplifiers and projectors, can still be useful to us, and moreover, it can be part of our intelligent house system. Once you have installed the Smart Implant in your audio equipment, you can activate it with the voice control. Use your favourite equipment in a new intelligent version.

 

Intelligent switch activating the scene of the FIBARO system that you need

We like it when a minimal effort on your part is enough for the domestic appliances to start making your life easier. If you install the Smart Implant in a wall switch and in a chosen equipment, you can start you’re the scene of your ‘Home cinema’ with a single movement. In a minute, the light will be dimmed, the projector and the music will be switched on, and the blinds will be pulled down. The Smart Implant is small but extremely versatile.

 

An equipment for special tasks

The Smart Implant is the outcome of work performed on the extension of the FIBARO Universal Binary Sensor functionalities resulting from the analysis of the needs of both FIBARO installers and users. The Smart Implant is a real game changer : it allows you to increase the possibilities of integrating your «non intelligent» devices in the FIBARO system and provides the installers with a solution to the clients' problems.

 

FUNCTIONS

• Compatible with any Z-Wave or Z-Wave Plus certified controller
• Let your alarm system communicate with your Z-Wave house automation system.
• Supports Z-Wave network security modes : S0 with AES-128 and S2 encoding authenticated with PRNG-based encoding
• 2 potential-free inputs (connection of 2 alarm sensors for example)
• 2 potential-free outputs independent from inputs
• Functions like a Z-Wave signal repeater
• Remote controls equipment
• Up to 12 possible actions assigned to a scene
• Compatibility with alarm sensors
• Compatibility with two binary and 0-10 V sensors
• Integrated temperature sensor
• Supports up to 6 1-Wire Dallas DS18B20 temperature sensors or one DHT-22 temperature and humidity sensor

 

TECHNICAL SPECIFICATIONS

• Type of module : Z-Wave Transmitter/receiver
• Power : 9-30V DC ±10%
• Inputs :
  • 2 analogical 0-10V / binary inputs
  • 1 1-wire input (for DHT22 or DS18B20 sensors)
• Outputs : 2 potential-free outputs (for the control of external circuits)
• Digital sensors supported : 6 DS18B20 or 1 DHT22
• Maximum current in outputs : 150mA
• Maximum tension in outputs : 30V DC / 20V AC
• Measuring span of the integrated temperature sensor : -55 ° C to 126 ° C
• Wireless technology : Z-Wave (series 500 chip)
• Radio frequency: 868,4 MHz
• Transmission distance : 50 m outside, 30 m inside (depending on the terrain and the structure of the building)
• Operating temperature : 0-40 ° C
• Dimensions: 29 x 18 x 13 mm (L x l x h)