MDT - Universal Interface 2-fold, Flush mounted, to connect potential free contacts, with LED output

The MDT Universal Interface detects status changes at the inputes and triggers KNX telegrams depending on his parameterizations. You can connect conventional push-buttons or auxiliary contacts (e.g. door and window contacts) to the device. The length of connection cables is 22cm. Each input can be set as a LED output and drive a low current LED.

Function

• To connect push buttons or window/auxiliary contacts
• Each input can be configured as a 1.5mA output for a low current LED.
• (Not with BE-02230.01)
• New multi-touch function, sends up to 4 values/DPTs to the same or different objects.
• Innovative group control with long/extra long button press.
• 4 integrated logic modules, e.g. interpretation of inputs, e.g. closing windows or sending a signal to the outside.
• Telegram flow limitation
• Operation via NO or NC contact, adjustable button length
• Dimming and shut-off function for 1- and 2-button operation
• Forced setting function for each output
• Short/long button press with 2 objects
• Pulse counting
• Cyclic transmission of contact status adjustable
• Flush-mounted installation (connection cable length: 22cm)
• Dimensions (W x H x D): 41mm x 41mm x 12mm
• Integrated bus coupling unit
• 3 year warranty

Technical specifications

• Number of channels 2
• Contact voltage 3.3VDC* internal
• LED current per channel ~1mA
• KNX interface specification TP-256
• Application software available ETS 5
• KNX bus connection terminal 0.8mm Ø, solid core
• KNX bus power supply
• KNX bus power consumption typ. <0,25W
• Permitted input cable length 10m
• Operating temperature range 0 to + 45°C
• Enclosure IP 20
• Dimensions UP (W x H x D) 41mm x 41mm x 12mm