go-e - Charging station go-e Charger Gemini 2.0 11KW (fixed installation)

Full Access from Anywhere, Even Without Wi-Fi

No matter where you use the new go-e Charger Gemini 2.0, thanks to the integrated SIM card, you have access to your charging station from anywhere, even without Wi-Fi, and can always enjoy the smart features. Only the MQTT and Modbus TCP protocols still require Wi-Fi due to the large amount of data or technical requirements.

Smart Charging. Arrive with Ease

With the intelligent stationary charging station, you can intelligently control and monitor the charging process from anywhere via an app. The go-e Charger Gemini 2.0 with integrated SIM card has all the smart features of the previous Gemini series, but now also without Wi-Fi.

Wi-Fi or SIM Card – As You Wish

The go-e Charger Gemini 2.0 is always there when you need it. Data transmission is carried out not only via Wi-Fi, but also via the 4G LTE Cat-1 mobile telephony standards or fallback to 2G/Edge. This way, you can use the smart features of the go-e Charger, such as load management, PV surplus charging or flexible and therefore advantageous electricity tariffs, to name just a few, even if your go-e Charger is not within Wi-Fi range.

Even Faster Updates

You can now receive new features, security updates, or software updates not only via Wi-Fi but also via the mobile network. Thanks to Over-the-Air updates, which are possible via the integrated SIM card in the charging station, you now have access to new features and improvements, even if you cannot integrate your go-e Charger into Wi-Fi. In this case, we also keep your go-e Charger young permanently so that it remains a long-term friend.

Quick Support Thanks to Mobile Connection

You can now receive new features, security updates, or software updates not only via Wi-Fi but also via the mobile network. Thanks to Over-the-Air updates, which are possible via the integrated SIM card in the charging station, you now have access to new features and improvements, even if you cannot integrate your go-e Charger into Wi-Fi. In this case, we also keep your go-e Charger young permanently so that it remains a long-term friend.

You don't have to worry about a poor Wi-Fi connection interfering with your smart charging experience. The factory-installed SIM card in the go-e Charger Gemini 2.0 gives you a free mobile connection for at least 5 years. Possibility of extension. See technical data.

Features

• 11 kW charging station with control via a free app for Android and IOS
• Connection to the vehicle side Type 2 socket
• Display of current and charging status via LED ring, adjustable charging power via push button and app
• Residual current circuit breaker (RCD) with DC current detection, 20 mA AC, 6 mA DC
• RFID access control, WLAN with up to 10 simultaneously teachable networks
• Open API for integration with third-party systems

TECHNICAL SPECIFICATIONS

Maximum Charging Power

• 11 kW

Configurable Charging Current

• 6 A to 16 A (1.4 kW – 3.7 kW – 7.4 kW – 11 kW)
• in 1 A steps via the app or
• in 5 steps via push button

Nominal Voltage

• 230 V / 240 V (single-phase) / 400 V / 415 V (three-phase)
• Single-phase/three-phase switching via app

Control, Current and Status Display

• Button, app (local or global access via WLAN)
• Indication by LED and app

Safety

• Indoor and outdoor installation
• RCD protection module with DC current detection
• Charging cable lock
• RFID access control

Comfort and Durability

• Electricity meter (protocol via app download with geographical data)
• RFID chip management
• Planner
• Flexible electricity tariffs
• Eco mode / scheduled charging mode
• Static load balancing
• Static load management, dynamic load management in combination with the go-e Controller
• Photovoltaic connection via API

Power Connection

• 1.8 m cable, 5 x 6 mm² (11 kW)

Dimensions

• Approx. 15.5 x 26 x 11 cm

Interfaces, Communication Protocols

• HTTP API (Local + Cloud), MQTT,
• OCPP 1.6, Modbus TCP, Network Operator API

Weight

• Approx. 1.63 kg (11 kW)