Thermofloor - Z-wave+ 700 Z-Dim2 rotary dimmer switch

Heatit Z-Dim2 is a Z-Wave rotary dimmer for many types of lighting fixtures. The Heatit Z-Dim2 works on most light loads without causing flicker.

The dimmer is equipped with an external switch option. This allows you to dim and turn on/off the load from an external switch.

Heatit Z-Dim2 is very suitable for LEDs and can be integrated into System 55 frames. When connecting small loads, it is recommended to use a bypass.

FUNCTIONS

• Z-Wave rotary dimmer
• Works in a 2-wire installation (without neutral)
• Dims LED lights from 5 to 250W
• Nemko certified
• Power measurement
• SmartStart
• Firmware update (OTA)
• Overload protection
• Short circuit protection
• Overvoltage protection
• Overheating protection
• External switch
• Min. brightness level
• Max. automatic brightness level calibration
• Supports encryption mode: S0, authenticated class S2, unauthenticated class S2

TECHNICAL SPECIFICATIONS

• Protocol: Z-Wave Plus, 868.4 MHz
• Chip: Z-Wave 700 chip
• Rated voltage: 230V 50/60Hz
• Power: 5W - 250W
• Input current: 0,9A
• Controls: dimming by push button and rotation
• Ambient temperature: 5 ° C to 40 ° C
• RF range: minimum 40 meters
• IP class: IP21
• Mounting depth: 24 mm
• Dimensions: 84 x 84 x 43 mm
• Weight: 79 g
• Approvals: Z-Wave Plus V2, CE, Nemko