ESPHome Wifi plug in Swiss format

This Swiss-format WiFi socket is equipped with an ESP8285 chip and is automatically recognized in Home Assistant through the ESPHome add-on. Easy to install, save on your electricity bills while gaining comfort and security.

The key to the smart home: This revolutionary smart plug transforms any device into a smart one. Control your lamps, heaters, and more, simply with your voice or from your smartphone.

Easy programming: Schedule the on and off times of your devices for optimal energy management.

Reduce your electricity bills: Thanks to its ability to turn off standby devices, this smart plug is a cost-effective investment in the long run.

A safer home: Program the lighting to simulate your presence even when you're away, enhancing the security of your home.

Installation in a snap: Quick and easy configuration, compatible with Home Assistant.

Technical Specifications

• Firmware: Pre-installed ESPHome, compatible with Home Assistant
• Chipset: ESP8285 with 2MB of flash memory
• Input voltage: 100-240VAC, 50/60Hz
• Current: 16A (Max)
• Rated power: 3840W
• Standard: Switzerland
• Wi-Fi: IEEE802.11b/g/n, 2.4GHz
• Color: White
• Operating temperature: -20°C to +50°C
• Material: ABS+PC plastic, fire protection class 94-V0
• GPIOs: Various GPIO configurations available
• Power consumption monitoring: Yes

Installation Instructions:

1. Turn on the socket.
2. Use a phone/computer to search for the SSID: Athxx_xxxxxxx.
3. Connect and configure the SSID and password for your 2.4G Wi-Fi.
4. In Home Assistant, find the new device and complete the installation.