NodOn - Z-Wave+ Wall Switch - Cozy White

Presentation

NODON Z-Wave Plus wall switch

The NodOn® wall switch can directly control any Z-Wave® or Z-Wave® Plus - compatible device, or control areas via a compatible home automation control device.

The switch is delivered with 2 half-buttons to control 2 groups of devices.
The switch has a mounting plate to easily assemble it in the house: By using the screws of a flush-mounted installation box, by screwing it to the wall, or quite simply by sticking it using the double-sided adhesive strips provided on the back of the plate.

CONTROL SEPARATELY OR THROUGH A CENTRAL HOME AUTOMATION SYSTEM

If you are hesitating about investing in a home automation system, the NodOn® wall switch can directly control (as primary controller) all the Z-Wave® compatible devices in your home.
You can then integrate your switch into a home automation system in order to expand your installation.

EASY TO MOUNT AND REMOVE

This wall switch can be easily mounted or removed using screws or adhesive strips.

PLEASANT PRESSING SENSATION

The NodOn® switch provides a pleasant pressing sensation. A discreet "click" enables you to return to correct operation.

WIRELESS

The NodOn® wall switch is also wireless, so you can avoid carrying out construction work and damaging your walls.

2 YEARS OF BATTERY LIFE

The Nodon® switch provides you with battery life that can last up to two years.* 

Technical Specifications

• Power supply: CR2032 battery – Autonomy: 1.5 - 2 years
• 4 buttons
• Wall mounting using double-sided tape (included) or screws (not included)
• Operating temperature: 0°C to 40°C
• Altitude: 2000m
• Z-Wave® radio protocol: 868.4MHz – 500 Series – Compatible Z-Wave Plus® SDK 06.51.06
• Range: 40m indoors / 70m outdoors
• Dimensions: 80*80*15mm
• 2 year guarantee

Standards

• EN 60950-1:2006 +A11:2009 + A1:2010 + A12:2011 + A2:2013
• EN 300 220-2 V2.4.1
• EN301 489-1 V1.9.2
• EN301 489-3 V1.6.1
• EN 62479:2010