Your home’s smart indoor siren.
You can use Z-Wave to make your home smarter. You can use Z-Wave to make your home more secure. And you can use Siren 6 to make your home smarter, safer, and more secure.
Siren 6 for security.
Whether it’s remotely monitored or self-monitored, Siren 6 is the perfect indoor siren for a Z-Wave security system. In the event of an intrusion or break-in being detected by an number of Z-Wave sensors, it can sound any one of up to 15 pre-configured tones at an ear-splitting 105 decibels.
Siren 6 for safety.
Enhanced with Z-Wave, Siren 6 isn’t just a part of your home’s security system, but also a part of your home’s safety system. In the event of an emergency, or something you need to be notified of, Siren 6 can be used as an extra speaker for other connected-devices including Z-Wave smoke and leak detectors.
Siren 6 for more.
Siren 6 really is Z-Wave’s most connected alert system. Easy to set up as a siren, it’s just as easy to convert it to a doorbell. Paired with an optional accessory, Button, Siren 6 will offer the same functionality as Aeotec’s Z-Wave doorbell, Doorbell 6.
105db speaker.
Siren 6’s ear-splitting 105db speaker is your home’s first line of defence in the event of a break-in. If that’s too loud for your needs, Siren 6 can be configured to sound its alarm at anywhere between 80dB and 105db.
Visual alerts.
Should the audio alerts be unable to get your attention, Siren 6’s visual alerts will. Each siren has multiple strobe LEDs embedded into its face, capable of visually alerting you to an incident with 1,000 lumens of light.
Backup battery.
Sometimes emergencies happen when your power is out. Sometimes it’s the emergency that causes it, such as an intruder preparing for entry. Siren 6 includes an embedded, constantly-recharging backup-battery meaning that it can operate for up to 4 hours even when your power is out.
S2 Z-Wave Plus.
It helps to keep your home safe and secure, that’s why Siren 6 is also safe and secure. Using Aeotec’s exclusive blend of Z-Wave Plus and S2, Siren 6 offers 3 different layers of wireless security to prevent hacking or interference by intruders.
Plugin.
No complex wiring. No expensive installation. Setting up Siren 6 couldn’t be simpler. Select where you want it to be in your home, plug it into a nearby power outlet, and then sync it with your Z-Wave system.
Secure.
Once setup, installing Siren 6 can be as easy as placing it on a shelf. It can also be secured and locked in place to a surface, such as a wall or ceiling, using the provided wall-mount plate and screws.
Technical Specifications
- Name: Siren 6
- Model Number: ZW164
- Dimensions: 76 x 76 x 38.5 mm
- Wireless Technology: Z-Wave, 433.92 FSK.
- Weight: 100g
- Repeater: Yes
- Beaming: Yes
- Z-Wave Plus: Yes
- Z-Wave Security: S0, S2 unauthenticated, and S2 Authenticated
- Z-Wave Hardware: ZM5101
- Z-Wave Library Type: Enhanced 232 Slave
- Z-Wave Device Type: Sound Switch
- Z-Wave Role Type: Always On Slave.
- Smart Start Compatible: No
- Input Voltage:
- Adapter: 5V/2A
- Battery: 3.7V
- Backup Battery:
- PT502035
- 400mAh
- Not Detachable
- Rechargable via power adapter
- 4 Hours total use.
- Storage: 16M
- Sensors: Vibration
- Max Supported Tones: 30
- Max Supported Buttons: 3
- Max Standby Power: 0.7W.
- Max Volume: 105dB from 5cm
- Operating humidity: 8% to 80%.
- Operating temperature:
- 0°C to 40°C
- Operating Distance:
